Allied Vision Technologies AVT Stingray Instrukcja Obsługi Strona 70

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 309
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 69
Camera dimensions
STINGRAY Technical Manual V2.2.0
69
Adjustment of C-Mount and CS-Mount
The dimensional adjustment is done by means of the adjustment spacer(s) as
shown in Figure 33: Stingray CS-Mount dimensions on page 67 and in Figure
34: Stingray C-Mount dimensions on page 68.
After dismantling and reassembling please make sure that all adjustment
spacers are back on place.
Caution
a
While dismantling adjustment spacers may get out of place
and get in the thread. To avoid this:
Hold the camera with the sensor down, put the adjust-
ment spacers on top of the adapter and screw camera and
adapter together.
Note
L
For all customers who know the C-Mount adjustment proce-
dure from Pike and Oscar cameras:
As mentioned above: adjustment of C-/CS-Mount with
Stingray cameras is done by means of adjustment spacers
(and not by two screws as with Pike/Oscar cameras).
The two screws on either side of the Stingray cameras are for
fixing the front flange.
Figure 35: Fixing the front flange
fixing the front flange
Przeglądanie stron 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 308 309

Komentarze do niniejszej Instrukcji

Brak uwag